Micro Dolphin Display Parking Sensors
Micro Dolphin Display Parking Sensors - Description
The Dolphin Micro Display Parking Sensor Kit is a 4 recess mounting sensor high quality system that will cover the widest of cars giving a professional finish. Included with the 4 20mm recess sensors is a digital display with inbuilt buzzer which gives audible bleeps with increasing frequency as you get closer to an obstacle and a digital countdown in cm (there is an on/off switch for the buzzer) (there is an on/off switch for the buzzer).
|
Kit Contents
|
 |
How it works
The system works by radiating ultrasonic beams covering the area behind the vehicle. The beams are reflected by obstructions behind the vehicle, and re-enter the sensors. The reflected beam information is processed to calculate the distance of the obstruction.
As with the other systems the Dolphin unit is activated when reverse gear is engaged. As the vehicle is reversed. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone.
|
Stage
|
Distance
|
Awareness
|
Alarm
|
|
1
|
200 - 160cm
|
Safe Mode
|
No
|
|
2
|
150 - 100cm
|
Safe Mode
|
Bi----Bi----Bi
|
|
3
|
90 - 50cm
|
Alarm Mode
|
Bi--Bi--Bi
|
|
4
|
40 - 30cm
|
Danger Mode
|
Bi-Bi-B
|
|
5
|
30 - 0cm
|
Stop
|
Bi----------
|
This is an example of the display in action. If you had a post just on one side of the car the illuminated bars would vary and the shortest distance reading would be displayed. |
 |
|
|
Swap Socket Feature All of our kits come with the new watertight swap socket feature based 12 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problems with faulty sensors or accident damage in the future it facilitates easy replacement without having to remove the bumper again and rewire from scratch. |
| Integrated Moulded Wedges These sensors have the wedges built in, you need to position the sensors slightly angled up - or downwards, to ensure the sensor's signal is still sent out parallel with the road's surface when placed in your vehicles bumper. |
 |
Technical Specification - Click Here
MaintenanceNo routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. The sensors can be washed carefully with warm soapy water
