Micro Dolphin Rear Roof Display 6 Sensor Reversing Kit
Micro Dolphin Rear Roof Display 6 Sensor Reversing Kit - Description
What You Get
The Micro Dolphin Roof Display Reversing Sensor Kit is a 6 recess mounting sensor high quality system that will cover the widest of cars giving a professional finish. Included with the 6 recess sensors is a digital display with inbuilt buzzer which gives audible bleeps with increasing frequency as you get closer to an obstacle and a digital countdown in cm. The display is both inverted ad reflected so it only makes sense when read through your rear view mirror. The display comes in a grey rather than black casing to match the interior of most car roofs. There is an on/off switch for the audio alerts which is built into the rear of the display.
|
Kit Contents
|
 |
How it works
The system works by radiating ultrasonic beams covering the area behind the vehicle. The beams are reflected by obstructions behind the vehicle, and re-enter the sensors. The reflected beam information is processed to calculate the distance of the obstruction.
As with the other systems the Dolphin unit is activated when reverse gear is engaged. As the vehicle is reversed. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone.
|
Stage
|
Distance
|
Awareness
|
Alarm
|
|
1
|
200 - 160cm
|
Safe Mode
|
No
|
|
2
|
150 - 100cm
|
Safe Mode
|
Bi----Bi----Bi
|
|
3
|
90 - 50cm
|
Alarm Mode
|
Bi--Bi--Bi
|
|
4
|
40 - 30cm
|
Danger Mode
|
Bi-Bi-B
|
|
5
|
30 - 0cm
|
Stop
|
Bi----------
|
This is an example of the display as it would be viewed in action in your rear view mirror. If you had a post just on one side of the car the illuminated bars would vary and the shortest distance reading would be displayed. |
 |
|
|
Swap Socket Feature All of our kits now come with the new watertight swap socket feature based 12 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problems with faulty sensors or accident damage in the future it facilitates easy replacement without having to remove the bumper again and rewire from scratch. |
| Integrated Moulded Wedges These sensors have the wedges built in, you need to position the sensors slightly angled up - or downwards, to ensure the sensor's signal is still sent out parallel with the road's surface when placed in your vehicles bumper. |
 |
Technical Specification
Maintenance
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. The sensors can be washed carefully with warm soapy water
