Rear Van Sensors, 4 Sensor Heads with Audio Beep Alerts
Rear Van Sensors, 4 Sensor Heads with Audio Beep Alerts - Description
Designed for fitting onto most Vans These Dolphin sensor kits comes with 4 recess mounting sensors. This Van parking sensor kit features longer 6m cables to enable easy installation on to the widest of vehicles. Included with the 4 recess sensors is an audio buzzer which beeps with increased frequency the closer you get to an obstacle. The buzzer is nice and loud and can be discreetly mounted somewhere suitable at the rear of the vehicle.
Kit Contents
- 4 x 6m Recess Bumper Fit Sensors
- 1 x Control Unit
- 1 x Audio Buzzer
- 1 Cutting Tool FREE!
- Fitting Accessories
- Instruction Manual
How it works
The system works by radiating ultrasonic beams covering the area infront of the vehicle. The beams are reflected by obstructions ahead, and re-enter the sensors. The reflected beam information is processed to calculate the distance of the obstruction.
When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone.
| Stage | Distance | Awareness | Alarm |
| 1 | 200 - 160cm | Safe Mode | No |
| 2 | 150 - 100cm | Safe Mode | Bi----Bi----Bi |
| 3 | 90 - 50cm | Alarm Mode | Bi--Bi--Bi |
| 4 | 40 - 30cm | Danger Mode | Bi-Bi-B |
| 5 | 30 - 0cm | Stop | Bi---------- |
| |
|
| Swap Socket Feature All of our kits now come with the new watertight swap socket feature based 6 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problems with faulty sensors or accident damage in the future it facilitates easy replacement without having to remove the bumper again and rewire from scratch. |
Optional Wedges
This system comes with optional angled wedges, giving greater flexibility according to the shape of your bumper.
Technical Specification
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. The sensors can be washed carefully with warm soapy water
